Enable HPE iLO virtual serial port on Proxmox VE

Note to self,

Set up a serial console for Proxmox VE before accidentally tripping over the network cables the next time:

 enable serial-getty@ttyS1.service
 start serial-getty@ttyS1.service

Then, next time you do, simply

  ssh iloc.lan vsp

do see what's wrong in there.

Comments

  1. BechaAugust 26, 2019 at 4:51 PM

    your step by step freenas does not explain how to enable DEVICE for the iSCSI service. Can you explain it

    Nor does it explain the parameters of the "extents"

    Thank you

    ReplyDelete

Post a Comment

Popular posts from this blog

iMovie event library on a network drive, NAS

I was shocked to find that iMovie '09 would not allow storing event libraries on networked disks. The AFP volume would show up, but remain non-functional with a yellow exclamation sign. There are plenty of instructions for hacking around the limitation with clumsy symbolic links. I discovered a much simpler approach, using an undocumented (?) setting built right into iMovie:"Allow Network Volumes". Use at your own risk, try the following command in Terminal defaults write -app iMovie allowNV -bool true
Read more

Proxmox PCIe passthrough on HP gen8 - failed to set iommu for container

Problem Setting up PCIe passthrough from host to a VM was supposed to be easy. However, being an HP server, there was a bit more to it than usual. The VM simply refused to start when configured use Nvidia GPU from the host: vfio error: 0000:04:00.0: failed to setup container for group 21: failed to set iommu for container: Operation not permitted In dmesg there was a bit more background on what was wrong: fio-pci 0000:04:00.1: Device is ineligible for IOMMU domain attach due to platform RMRR requirement.  Contact your platform vendor. Luckily, HP had issued a customer advisory on this. It describes a convoluted method to disable this RMRR per slot basis. It seems to work for me, so I thought I'd write down some notes if I ever run into this again. Basic setup Proxmox has decent instructions for preparing the host for passthrough setup in general, in summary: -  add  intel_iommu=on to   GRUB_CMDLINE_LINUX_DEFAULT  in the file  /etc/default/grub - add vfio modules to  /etc/modules
Read more

Backup and restore observium

Note to self, how to backup and restore an Observium installation such as Turn Key Linux . backup mysqldump --all--databases >sql.txt tar zcvf rrd.tgz /opt/observium/rrd restore log in at https://observium:12322/ as adminer import the sql.txt tar zxvf  rrd.tgz -C /
Read more